Marvis Actions

Anomaly Detection Event Card

The Anomaly Detection Event Card, as a part of Marvis Actions will show you a more detailed diagnosis on the anomalies of some of your Suggested Actions. The Event Card is available on Authentication (Both EAP/802.1X and PSK) and DHCP Failure events. To open an Event Card, go to one of these suggestions and select...

AP Actions

  Offline APs If there are any APs that are offline either due to lack of power, loss of cloud connectivity, or any other issue, we will detect that and display it on the Marvis Action Dashboard.  Marvis can determine the scope of offline AP actions, such as individual APs being down, a switch being...

Connectivity Actions

Connectivity Actions are divided into four types of failures: Authentication, DHCP, ARP, and DNS failures.  There are two stages of failures that get captured by Connectivity Actions. The Anomaly Detection model detects when things are starting to go bad on your site – when multiple clients are failing with the same reason.  These failures are...

Gateway Actions

Bad Cable Bad cable cases detected on the gateway side will show up on the Action Dashboard to give you a more complete coverage for Ethernet errors across your network.   Click on the ‘View More’ link in the Details column to bring up the Bad Cable Details card which shows which ports are affected by Bad...

Layer 1 Actions

Bad Cable Bad cable cases detected on the AP side will show up on the Action Dashboard to give you a more complete coverage for Ethernet errors across your network. With this new addition, you now have visibility into Gateway, Switch, and now AP bad cables. In our Actions suggestions section you can see the...

Other Actions

Other Actions is a new section in the Marvis Action Dashboard. The purpose of this section is to highlight other actions across your org which are less urgent & don’t require immediate action. Find this new section underneath the main Action Dashboard diagram by clicking on the Other Actions text. This will expose our new...

Switch Actions

Missing VLAN One of the features we get from the Marvis AI Engine is “Missing VLAN” detection and there is more to it than you think!  Check it out.     Click on the View More link to open a details card outlining the specific APs affected by the Missing VLAN:   After fixing this...

What is Marvis Actions?

    What is Marvis Actions? Marvis Actions is the proactive method of using Marvis to highlight/bubble up high user-impacting issues across a customer’s organization. This is the next level of our AI capabilities (dpcap, AI driver RRM, VNA etc.), wherein our customers can now experience the beginnings of a self-driving network, along with some...