FAQs

BLE and MAC Randomization

The Impact That MAC Randomization Has On Location Analytics Introduction Bluetooth is a wireless personal area networking standard for exchanging data over short distances. Bluetooth low energy (BLE) (also known as Version 4.0+ of the Bluetooth specification, or Bluetooth Smart) is the power- and application-friendly version of Bluetooth that was built for the Internet of...

BT11 Daisy Chaining

Location, especially wayfinding (which usually involves long hallways), can benefit from daisy chaining for power. This saves switch ports. To get four units as shown below, you need AT power either from an LLDP enabled switch (Cisco disables by default), or a 30-watt power injector for the first unit in the daisy chain. If it...

Location Diagnostic Beam Density Coverage Map

Check following prerequisites to show Beam Density Map coverage: Floor Map should be present in UI → Location → Live View Check App(SDK), to see if Wifi clients and BLE Assets are connected or not Beam Density Coverage Map: Coverage shows in the map for each device type – Wifi, BLE Assets, SDK for time...

Mist SDK FAQ

What is Mist SDK? Where do we use it? Mist SDK will provide you the indoor blue dot experience using Mist’s 16 vBLE antenna array Access point. Using this SDK, you will know where the user is and can provide the proximity-related notification using Mist patented vBeacon technology. You can use the Mist SDK to...