Access Point Portfolio

AP43 (E) 802.11ax (Wi-Fi-6)

AP43(E) ACCESS POINT SERIES The AP43 Series is a tri-radio, 4×4, 802.11ax access point. The 3rd radio functions as a network, location, and security sensor. It can also function as a synthetic test client radio, as well as a spectrum monitor. The AP43 also includes 802.11ax, which introduces OFDMA (Orthogonal Frequency Division Multiple Access), Multi-User...

Use cases for ports on the AP (Eth1, Module, IoT)

AP41 Eth1 port will give Data Out, but will not give PoE Out Module port will give Data Out IoT port can be used for digital inputs (0 to +5V), digital outputs (0 to +5V), and analog inputs (0 to +5V) AP43 Eth1 port will give Data Out and can also give PoE PSE mode...

Mist Access Points

AP43  – Series is a tri-radio 4×4 802.11ax Access Point AP43e  – Same tri-radio 4×4 802.11ax Access Point with six RP-SMA  connectors AP 41 – Flagship 4×4:4 AP with internal antenna AP 41e – Same 4×4:4 AP but with four RP-SMA connectors AP 21 – Entry level 2×2:2 AP AP 61 – Outdoor AP 4×4:4...

AP41 & A41(External)

AP41 & AP41(E) 4×4:4 Three WiFi Radios 2.4 GHz .11n 5 GHz .11ac Wave 2 Dual Band Security Radio BLE 16 Antenna Array (Software license required) Traditional BLE iBeacon / Eddystone USB Port IoT Interface (pls contact Mist Support for details) Dual Ethernet Additional Ethernet Module Port 12v DC Power in POE+ In and POE...

AP 61 (Outdoor)

                            AP 61 (Outdoor) 4×4:4  WiFi Radios 2.4 GHz .11n 5 GHz .11ac Wave 2 Dual Band Security Radio BLE 16 Antenna Array (Software license required) Traditional BLE iBeacon / Eddystone USB Port Dual Ethernet Additional Ethernet Module Port 12v DC Power...

AP21

                      AP21 2×2:2  WiFi Radios Can be split into 2x 1×1 for scanning 2.4 GHz .11n 5 GHz .11ac Wave 2 BLE 16 Antenna Array (Software license required) Traditional BLE iBeacon / Eddystone Dual Ethernet 12v DC Power in POE or POE+ In and POE...

BT11

  BT11 No WiFi Radios BLE 16 Antenna Array Traditional BLE iBeacon / Eddystone Dual Ethernet No 12v DC option – POE only POE+ In and POE out

BT11 Specific Information

BT11 consumes 6W and has POE forwarding BT11 can take in power from 802.3af and 802.3at Daisy Chaining is supported POE forwarding needs to be enabled for every BT11 on the AP screen If plugged into a 802.3af backend, can typically daisy chain two BT11s, maintaining 50’ or less separation between units If plugged into...