Optional viewing: Manual network configuration for lab use – EAP-TLS for Android

INSTRUCTOR: Let’s a look how we configure an Android device, in this particular case this is a Pixel 7 device, with our certificate. So we have the same two certs that we need to copy over to the Android device, either through USB or any other way.

You’ll then go to Settings. You’ll then go to Security and Privacy. You’ll then need to install those certificates.

We will go to encryption and credentials.

Install a certificate. Always select Wi-Fi certificate. First, select the mist certificate. Just call it mistcert. Click OK.

Then install the user certificate, the test-lab-client that we have created before. That is the client– oh, that’s the password. Should have read that.

Desktop client. Installed as well, great. Final step is to go to Network settings.

Go to internet. We will find our SSID we are trying to connect to.

We’ll select the EAP method as TLS.

C certificate will be mistcert, right there.

Now, Domain is the name of the server common name. In the case of mist default cert, that’s off auth.mist.com.

The user certificate will be test-lab-client. And identity is your common name of the certificate, basically, your username. In my case, that’s my email address. I’m going to click Connect. And now you see my client disconnected using a certificate that we’ll just load it.